Wrenches & Tubing Tools

Features

• Fast free-form bending of soft copper and aluminum tube.
• Inch and metric sizes.

Features:

• High-geared mechanical ratios bend heavy-wall steel tube (up to 1/8" wall thickness), stainless steel tube (up to 3/32" wall thickness) and hard copper water tube (types K and L).
• Benders produce uniform bends up to 180° with no need to anneal tubing or use special temper grade tubing.
• Reduce bending effort to a minimum.
• Inch and metric sizes.

Features

• The stainless steel specialist!

• High quality bending performance for stainless steel and other hard tubing such as steel and titanium.
• Two-stage design allows for in-place bending from 90 ̊ to 180 ̊ without ever crossing handles. Lock/unlock with a half turn rotation of the bending handle.
• Extra long 16" (40 cm) handles increase leverage and roll dies in the bending form reduce force needed.
• Vise clamp built into bending form for extra stability.
• Inch and metric sizes.

Additional Information:

• Item Code: 600 Series

Features

• Designed to easily bend three different sizes of soft copper tubing with the same tool. Ideal for plumbing and HVAC applications.
• A 90° start angle minimizes effort required to form a bend. Handy reference marks indicate the angle for quick bends through 90°.

Additional Information:

• Item Code: 456

Features

• Deburring tool for plastic pipe and tubing.
• Made of high-grade steel with specially-designed, long-lasting cutting edges.
• Slip-resistant vinyl hand grip.
• Ideal for removing outside ridges and inside burrs on plastic pipe and tubing.

The RIDGID® Model HC450 is engineered for continuous 1⁄4" (6 mm) to 4 3⁄4" (120 mm) hole cutting in and up to 8" (203 mm) diameter steel unpressurized pipe. The built-in level ensures line up for multiple holes when branching lines using Mechanical T®, Vic-O-Let™ fittings or welded saddles. The HC450 is ideal for mechanical, industrial maintenance and fire protection contractors since it cuts holes into a wide variety of pipe materials. No off-the-shelf drill-based hole cutter compares in performance or durability to the rugged purposed-built Model 450.
Features

• Engineered for continuous dry or oiled hole cutting.
• Dual-side controls provide easy operation.
• GFCI and a built-in breaker for operator protection.
• Two carrying handles ease mounting and alignment.
• Built-in level for multiple hole alignment.

Specifications

Additional Information:

• Item Code: HC450

Features

• Combines tube O.D. cleaning and fitting I.D. brush into one hand tool.
• High carbon steel brushes quickly clean ½" (12 mm) to ¾" (19 mm) nominal tube and fittings in preparation for soldering or brazing.
• Durable plastic construction designed for easy brush replacement.

This machine is designed to cut, clean, ream and deburr copper and stainless steel tubing and fittings quickly and professionally. Weighing only 50 lbs (23kg) and possessing a conveniently located carrying handle, the 122 is ideal for transport directly to the job site. Rugged cast aluminum housing and powerful 1/3 HP induction motor assure long life.

Features :

• Tube and fitting capacity: 1/2" - 2" (12 mm-54 mm).
• Powerful 1/3 HP induction motor drives rollers at 450 RPM.
• Rugged O.D. cleaning brush cleans tubing quickly with minimal effort.
• Core reamer easily removes turbulence-causing burrs.
• Cutting handle adjusts to accommodate different tubing sizes.
• Large carrying handle for easy transport to the job site.
• Guide rollers ensure a straight cut with no tracking.
• Built-in 1/2" (12 mm) incremental scale for quick, easy measuring.
• Copper cutter wheel tested to over 10,000 cuts.
• Fitting brush Kit includes six brushes, storage rack and collet.
• Approved by CSA to CSA and UL standards.

Specifications :

Additional Information:

• Item Code: 122

This machine is designed to cut, clean, ream and deburr copper and stainless steel tubing and fittings quickly and professionally. Weighing only 72 lbs (32.7 kg) and possessing a conveniently located carrying handle, the Model 122XL is ideal for transport directly to the job site. Rugged cast aluminum housing and powerful 1/3 HP induction motor assures a long life.

Features:

• Tube and fitting capacity: 1/2" - 4" (12 mm - 108 mm).
• Powerful 1/3 HP induction motor drives rollers at 300 RPM.
• Rugged O.D. cleaning brush cleans tubing quickly with minimal effort.
• Core reamer easily removes turbulence-causing burrs.
• Cutting handle adjusts to accommodate different tubing sizes.
• Large carrying handle for easy transport to the job site.
• Guide rollers ensure a straight cut with no tracking.
• Built-in 1/2" - incremental scale for quick, easy measuring.
• Cutter wheel tested to over 10,000 cuts.
• Fitting brush kit includes six brushes, storage rack and collet.
• Approved to UL standards (NRTLC) (115V only).
• CSA approved (115V only).

Specifications :

This machine is designed to cut, clean, ream and deburr copper and stainless steel tubing and fittings quickly and professionally. Weighing only 72 lbs (32.7 kg) and possessing a conveniently located carrying handle, the Model 122XL is ideal for transport directly to the job site. Rugged cast aluminum housing and powerful 1/3 HP induction motor assures a long life.

Features

• Tube and fitting capacity: 1/2" - 4" (12 mm - 108 mm).
• Powerful 1/3 HP induction motor drives rollers at 300 RPM.
• Rugged O.D. cleaning brush cleans tubing quickly with minimal effort.
• Core reamer easily removes turbulence-causing burrs.
• Cutting handle adjusts to accommodate different tubing sizes.
• Large carrying handle for easy transport to the job site.
• Guide rollers ensure a straight cut with no tracking.
• Built-in 1/2" - incremental scale for quick, easy measuring.
• Cutter wheel tested to over 10,000 cuts.
• Fitting brush kit includes six brushes, storage rack and collet.
• Approved to UL standards (NRTLC) (115V only).
• CSA approved (115V only).

Specifications

Additional Information:

• Item Code: 122XL

Features:

• Handy for quick, clean and easy I.D. reaming and O.D. beveling of 1⁄4" (6 mm) to 1 1⁄2" (40 mm) tube.
• Plastic construction with long-wearing alloy steel blades.
• Gives fast, professional reaming on copper, aluminum, brass and other types of tubing.

Additional Information:

• Item Code: 127

Features

• Includes 45 cutting edges on interior cone allow for fast, clean, inner reaming and outer deburring/beveling of 1⁄4 (6 mm) to 2" (50 mm) copper and stainless steel tubing.
• Hardened steel construction.
• Dual inch/metric measurement bar.

Additional Information:

• Item Code: 223S-227S

Features

• Designed for bending annealed copper, steel and stainless with a wall thickness less than or equal to 0.06" (1.5 mm) to a maximum of 180°.
• Offset cushion grip handles for comfort when forming 180° bends. A 90° start angle and unique oil-absorbing shoe minimize bending effort while forming accurate bends.
• Inch and metric sizes.

Additional Information:

• Item Code: 400 Series