Drain Cleaning

3/4" to 1 1/2" (20 mm to 38 mm) Drain Lines

• Clean - Cable contained inside guide hose to minimize cleanup of hands, work areas and fixtures.
• Immediate Results - Strong, durable MAXCORE® 50 cable for tough blockages.
• AUTOFEED® Control - Conveniently powers cable down drain and through blockages. Aluminum paddles advance cable 20% faster.
• MAXCORE® 50 Cable - Includes 1/4" x 30' (6 mm x 9 m) Inner core cable for increased strength and longer life. Provides 50% more cleaning power for tough blockages.
• Powerful Motor - Single phase, AC 1.1 Amp, 60Hz, 450 RPM, CSA approved.

Additional Information:

• Item Code: K-30

3/4" to 2 1/2" (20 mm to 75 mm) Drain Lines

• 1⁄4" (6 mm) cables best for 3/4" to 1 1/2" (20 mm to 40 mm) lines.
• 5⁄16" (8 mm) cables best for 3/4" to 1 1/2" (20 mm to 40 mm) lines.
• 3⁄8" (10 mm) cables best for 1 1/4" to 2 1/2" (30 mm to o 75 mm) lines.

Additional Information:

• Item Code: K-45

3" to 6" (75 mm to 150 mm) Drain Lines

The K-750R is a self-contained drain cleaner ideal for lateral drain lines from 3" to 6" (75 mm to 150 mm). Easy-to-transport, narrow design for small entry ways and minimal setup make this machine ideal for tough mainline work. Comes equipped with a large blade assortment to handle numerous applications. Clears roots, debris and foreign objects out of main lines, storm drains, house laterals and leach lines.

• Clear access to drum allows immediate view of cable for inspection plus easier and faster cleaning of drum and cable.
• Patented Cable Control System slows the drum, should cable or blade become completely lodged in blockage.
• New integral-wound, solid core cable is tough and kink resistant. 5/8" x 100' (16 mm x 30.5 m).
• Dual kickstands.
• New torque limiter feature.
• Lean, balanced design for easy one-man transport and operation.

Additional Information:

• Item Code: K-750R

3⁄4" (20 mm) to 4" (110 mm) Drain Lines

• A powerful, easy to transport, versatile machine for cleaning indoor drains. Requires minimal set-up to clean sink lines, floor drains and roof vents.
• Rugged, corrosion-resistant molded cable drum won’t dent or rust. The drum tilt adjusts for proper cable feed angle. Inner-drum guards against cable flip-over inside the drum.
• Cable drum quick-release and built-in hand-holds allow easy cable change and transport.
• Maximum drum capacity is 100' (30,5 m) of 3⁄8" (10 mm) or 90' (27 m) of 1⁄2" (12 mm) continuous length cable
• 3⁄8" (10 mm) cable best for 1 1⁄2" (40 mm) to 3" (75 mm) lines up to 100' (30,5 m)
• 1⁄2" (12 mm) cable best for 2" (50 mm) to 4" (110 mm) lines up to 90' (27 m)
• Optional sink drum holds up to 50' (15 m) of 5/16 (8 mm) or 1/4 (6 mm) cable
• Ideal for cleaning through 3/4" (20 mm) to 1 1/2" (40 mm) sink traps
• Powerful 175-watt universal motor spins cable at 240 RPM. When cable hits blockage, motor gears down automatically to deliver more power and enhance operator control.
• Tools connect to cable in seconds.
• Heavy-duty AUTOFEED® system.
• Includes RIDGID® leather drain cleaning gloves and operator’s manual.

Additional Information:

• Item Code: K-3800

3" to 6" (75 to 150 mm) Drain/Sewer Lines Up to 200’ (61 m)

K-6200 machines offer superior maneuverability and a small footprint allows easy access to tight work areas. It comes equipped with either Inner Core cable or Integral Wound cable. Recommend 5/8" (16 mm) cable for 3" (75 mm) to 6" (150 mm) drain lines up to 200' (61 m).

• Patented Cable Control System – Causes the drum to slow down when the blade becomes lodged in a blockage. Limits potential for cable flip over.
• Direct Drive Design – 4/10 HP universal motor and gearbox bear down as torque builds. Audible warnings let operator know when blockage is encountered. Drum requires no adjustments to stay aligned and tight on drive shaft.
• Easy Maintenance Construction – Separate drum and machine in seconds. Inner drum and guide tube remove easily to maintain or replace cable.
• Designed Durable and Stable – Low center of gravity frame design and custom kickstand keep machine firmly anchored during operation. Rugged, corrosion-resistant polyethylene drum is rust and dent proof. Double tubular frame is lightweight and designed for extra strength.
• AUTOFEED® Control and Standard Accessories – Powerful feed mechanism is built to last and is easily maintained. AUTOFEED control, toolbox and selection of cutters included in all models.

Motor

Additional Information:

• Item Code: K-6200

2" to 10" (50 to 250 mm) Drain/Sewer Lines

• A gasoline engine makes the Model K-1500G well-suited for cleaning lines in remote locations where electrical power is unavailable. Cuts through roots fast.
• Unique, easy-to-use, instant-acting cable clutch maximizes operator control. Pull down on the handle and the cable spins at 600 RPM. Release handle, cable stops instantly.
• Comes equipped to use 1 1⁄4" (32 mm) cable to clean 3" (75 mm) to 10" (250 mm) lines through 300' (92 m).
• 6 HP gasoline engine drives cable via four-speed transmission. Allows the operator to vary the cable spinning speed to fit the application. Forward speeds of 333, 425 and 500 RPM, and a reverse speed of 250 RPM.
• Low-profile, four-wheel cart easily rolls to the job. Guards against machine upset and possible fuel spillage.
• Includes A-1 RIDGID® drain cleaning mitt and operator’s manual.

Machine Dimensions

Additional Information:

• Item Code: K-1500G

1 1/4" to 4" (32 mm to 100 mm) Drain Lines

This jetter propels a highly flexible hose through 1 1/4" to 4" (32 mm to 100 mm) lines–blasting through sludge, soap and grease blockages. As you pull the hose back, it power scrubs the line, flushing debris away and restoring drain lines to their free-flowing capacity.

• Powerful: Actual working pressure of 1350 psi (93 bar) and flow of 1.4 GPM (5.3 l/min) for fast, effective cleaning of lines.
• Pulse Action: Activate the Model KJ-1350's plus action to easily negotiate difficult bends and traps. The Model KJ-1350-2 has a second level of pulse.
• Portable and Compact: The optional H-10 Cart rolls the jetter and hose to the job site. Jetter and hose reel are easily removed from the cart in seconds for hard to reach drains or remote storage. The compact cart offers a retractable handle and swivel hose reel minimizing storage space. Optional adapter allows the KJ-1350 to be mounted on the upright H-30 Cart.
• Electrical Requirement: The 1.5 HP motor draws a maximum of 14 Amps and can run on most standard 115V circuits.
• Easy to use: Thrust propels the hose down the line. You simply guide the hose into the drain.
• High Quality: Duplex pump with corrosion-resistant, forged brass head. New pressure control valve allows quick and easy pressure adjustment.
• Dependable: Reduced number of fittings, hoses and parts minimizes leaks and down time keeping you on the job.
• Versatile: Optional power washer package cleans cables, tools and other heavily soiled equipment.
• CSA approved. Approved to UL standards (NRTLC).

Additional Information:

• Item Code: KJ-1350

1 1/4" to 6" (32 to 150 mm) Drain Lines

This jetter propels a highly flexible hose through 1 1⁄4" to 6" (32 mm to 150 mm) lines blasting through sludge, soap and grease blockages. As you pull the hose back, it power scrubs the line flushing debris away, restoring drain lines to their full, free-flowing capacity.

• Powerful - Actual working pressure of 2200 psi (150 bar) and flow of 2.4 GPM (9 l/min) for fast, effective cleaning of lines.
• Easy to Use - Thrust propels the hose down the line. You simply guide the hose into the drain.
• Pulse Action - Activate the KJ-2200’s pulse action to easily negotiate difficult bends and traps.
• Portable - The optional H-30 cart rolls the jetter and hose to the job site. The jetter is easily removed from the cart in seconds for hard to reach drains, indoor applications or remote storage.
• Convenient - Standard equipment includes FV-1 foot valve. It makes remote or indoor operation simple and safe. You control the jetting action at the drain while leaving the jetter outdoors.
• Quality & Dependability - Triplex pump with corrosion-resistant, forged brass head. Reduced number of fittings, hoses and parts minimizes leaks and down time – keeping you on the job.
• Versatile - Optional power washer package cleans cables, tools and other heavily soiled equipment.
• New and improved 6.5 HP Recoil start gasoline engine starts easily. Features: ON/OFF switch; choke and throttle controls; easy access oil fill and dip stick.

Additional Information:

• Item Code: KJ-2200

2" to 10" (50 to 250 mm) Drain Lines

The RIDGID® Model KJ-3100 portable water jetter gives you 3000 psi (205 bar) actual working pressure to handle large commercial and industrial applications. This jetter propels a highly flexible and lightweight hose through 2" to 10" (50 to 250 mm) lines blasting through sludge, soap, grease, and sediment blockages. As you pull the hose back, it power scrubs the line flushing debris away and restoring drain lines to their full, free-flowing capacity – all without the use of harmful chemicals.

• Powerful - Actual working pressure of 3000 psi (205bar) and flow of 5.5 GPM (21 l/min) for fast, effective cleaning of lines.
• Lightweight Hose - Hose with nylon braid provides significant weight reduction and increased flexibility – all without reducing strength. Allows the thrust to propel the hose further down the line.
• Complete - With the Model KJ-3100’s removable hose reel, there is no need to purchase expensive portable hose reels. Standard packages come equipped to handle indoor and remote applications.
• Convenient - Completely remove the hose reel to ease loading onto service trucks. Simply rotate the hose reel forward to gain full access to the engine’s gas tank and air filter.
• Maneuverable - In the heavy-duty 3000 psi (205bar) jetter category, the RIDGID KJ-3100 is one of the most maneuverable jetters on the market. The unit, on its unique two-wheeled cart, easily fits through standard size doors and can negotiate tight turns with the greatest of ease.
• Pulse Action - Activate the Model KJ-3100’s pulse action to easily negotiate difficult bends and traps.
• Quality & Dependability - Triplex pump with corrosion-resistant, forged brass head. Gear reducer allows pump to run at slower (optimal) speed. Reduced number of fittings, hoses and parts minimizes leaks and downtime – keeping you on the job.
• Versatile - Power wash package and chemical injector system cleans cables, tools, and other heavily soiled equipment.
• Quick Start - 16 HP Recoil start gasoline engine starts easily. Features: ON/OFF switch; fuel shutoff; choke and throttle controls; easy access oil fill and dip stick.

Additional Information:

• Item Code: KJ-3100

1 1/4" to 4" (32 to 100mm) Drain Lines

This jetter propels a highly flexible hose through 1 1/4" to 4" (32 to 100mm) lines–blasting through sludge, soap and grease blockages. As you pull the hose back, it power scrubs the line, flushing debris away and restoring drain lines to their free-flowing capacity.

• Powerful: Actual working pressure of 1750 psi and flow of 1.4 GPM (5.3 l/min) for fast, effective cleaning of lines.
• Pulse Action: Two levels of pulse are standard. Activate the KJ-1750’s pulse action to easily negotiate difficult bends and traps.
• Portable: The optional H-30 Cart rolls the jetter and hose to the job site. The jetter is easily removed from the cart in seconds for hard to reach drain or for remote storage. Optional adapter allows the KJ-1750 to be mounted on the compact H-10 Cart.
• Electrical Requirement: The 2.0 HP motor draws a maximum of 17 Amps which requires a 20 Amp, 115V circuit.
• Easy to use: Thrust propels the hose down the line. You simply guide the hose into the drain.
• High Quality: Duplex pump with corrosion-resistant, forged brass head. New pressure control valve allows quick and easy pressure adjustment.
• Dependable: Reduced number of fittings, hoses and parts minimizes leaks and down time keeping you on the job.
• Versatile: Optional power washer package cleans cables, tools and other heavily soiled equipment.
• CSA approved. Approved to UL standards (NRTLC).

Additional Information:

• Item Code: KJ-1750

3/4" to 4" (20-110 mm) Drain Lines

Uses sections of 5/8” (16 mm) cable, cleans 1 ¼” to 4” (32-110 mm) lines up to 100 feet.

• C-8 best for 1 1/4” to 3” (32 mm to 75 mm) drains.
• C-9 best for 2” to 4” (50 mm to 102 mm) drains.

Equipped with an A-17 adapter for runs up to 50’ (15 m) of 5/16” (8 mm) cable or, 35’ (11 m) of 3/8” (10 mm) continuous length cable.

• 5/16” (8 mm) best for ¾” (20 mm) to 1 ½” (40 mm) lines.
• 3/8” (10 mm) best for 1 ¼” (32 mm) to 2” (50 mm) lines.

• Compact, versatile professional’s machine. Capable of running three different size cables: 5⁄16" (8 mm), 3⁄8" (10 mm) and 5⁄8" (16 mm). The perfect, all-around sink, shower and floor drain machine. Weighs less than 40 lbs (18 kg).
• Unique, easy-to-use, instant-acting cable clutch maximizes operator control: Pull handle down and cable spins at 400 RPM. Release handle, cable stops instantly.
• Equipped with 300-watt motor.
• Includes A-1 RIDGID® drain cleaning mitt and operator’s manual.
• Approved by CSA and UL Standards (115V only).

Additional Information:

• Item Code: K-50

2" to 10" (50 mm to 250 mm) Drain and Sewer Lines

• The finest all-around sewer and drain cleaning machine. One man can easily clean the heaviest blockages – indoors or out. High-speed cleaning gets the job done faster and better.
• Unique, easy-to-use, instant-acting cable clutch maximizes operator control: Pull handle down and cable spins at 600 RPM Release handle, cable stops instantly.
• Wheels to the job site – sets up fast, cleans up fast.
• Equipped to run, easy to handle, 15' (4.6 m) sections of 1 1⁄4" (32 mm) cable to clean 3" (75 mm) to 10" (250 mm) lines to 300' (91 m).
• Easy clutch jaw change-out adapts K-1500 to run 15' (4.6 m) sections of 7⁄8" (22 mm) cable through 2" (50 mm) to 4" (110 mm) lines up to 175' (53 m).
• Equipped with full 1500-watt motor and heavy-duty rotary switch.
• 10" solid ball bearing wheels.
• Low profile frame design will fit most crawl spaces
• Includes A-1 RIDGID® drain cleaning mitt and operators manual
• Approved by CSA to CSA and UL Standards (115V/230V)

Additional Information:

• Item Code: K-1500SP

2" to 8" (50 mm to 200 mm) Drain and Sewer Lines

• The finest all-around sewer and drain cleaning machine. One man can easily clean the heaviest blockages – indoors or out. High-speed cleaning gets the job done faster and better.
• Wheels to the job site – sets up fast, cleans up fast.
• Low-profile “B” frame design will fit most crawl spaces. Loads and unloads from truck easily. Upright “A” frame features cable carrier storage during transport, ideal for in-house applications.
• Equipped to run, easy to handle, 15’ (4.6 m) sections of 1 1/4" (32 mm) cable to clean 3" to 8" (76.2 m to 200 mm) lines to 200’ (61 m).
• Easy clutch jaw change-out adapts K-1500 to run 15’ (4.6) sections of 7/8" (22 mm) cable through 2" to 4" (50 to 100 mm) lines up to 175’ (53 m).
• Equipped with 3/4 HP motor. CSA approved. Approved to UL standards (NRTLC).

Additional Information:

• Item Code: K 1500

1 1/4" to 4" (32-100 mm) Drain Lines

Simple adjustment knob allows unit to spin both 7/8” (22 mm) and 5/8” (16 mm) diameter cable. Adjusts in seconds.

• 7/8” (22 mm) cable (C-10) cleans 2” to 4” (50 mm to 100 mm) lines through 150’ 45.7 m).
• 5/8” (16 mm) cable (C-7, C-8, C-9) cleans 1 ¼” to 4” (32 mm to 100 mm) lines through 125’ (38.1 m).

• A compact machine for institutional, commercial or residential cleaning. Also ideal for septic tank vacuum truck operators. Small enough to fit into cramped spaces, yet powerful enough to clear tough blockages.
• Ideal for rooftop vent stacks. Rear handle allows for easy transporting up ladders and onto rooftops.
• Remove only two bolts to access jaw set for cleaning or replacement. Removal of same bolts provides access to belt drive.
• Equipped with 1/2 HP motor. CSA approved. Approved to UL standards (NRTLC).

Additional Information:

• Item Code: K-60SP

1/2" to 1 1/2" (12.6 to 40 mm) Drain Lines.

• Pull trigger and turn handle, or add any variable speed (left / right) chuck drill machine for extra power.
• Cable self-feeds down drain.
• No mess. Hands don’t touch cable.
• Equipped with 1/4" x 25' (6.3 mm x 7.6 m) MAXCORE® cable with bulb auger.

• Sizes and lengths for use on sewer and drain lines through 8" (200 mm) in diameter and up to 100' (30,4 m) in length.
• Carrier included with all except 25' (7,6 m) model.
• All models have a hand grip and a spear point at one end and roller ball at the other.

RIDGID offers a wide variety of cutters and augers to clean everything from grease to root blockages. With the RIDGID line of cable tools, you will always have the right tool for the job.

• Drop Head Auger - For cleaning back to back mounted fixtures e.g., sinks where cable needs to be led into down pipe.
• Straight Auger - For use in exploring and breaking up stoppages or returning sample to surface to determine correct tool.
• Funnel Auger - For use as second tool in line. Breaks up remains of stoppage left by straight auger.
• Hook Auger - For heavy and dense root stoppages in pipes that require hooking and breaking up.
• Retrieving Auger - For searching for cable which is broken or lost in line.
• Spade Cutter - For following up after augers have been used and to open up floor drains.
• Four Blade Saw Tooth Cutter - For blockages caused by hardened, glazed material such as chemical deposits.
• Spiral Saw Tooth Cutter - For clearing any stoppage, roots, rags, sticks, etc.
• Saw Tooth Cutter - For cleaning lines blocked heavily with roots. Unique design permits cutter to be removed from damaged pipe without locking.
• Grease “C” Cutter - For grease blockage in lines leading from garbage disposal unit or waste pipe.
• Grease Cutter - For lines which have become badly greased with detergents and have to be opened.
• Spiral Bar Cutter - For main sewers blocked by roots, leaf debris, sticks, sawdust, cloth, and sacking.
• Sharktooth Cutter - For use in cleaning pipes of general material clinging to pipe walls.
• Expanding Finish Cutters - For final removal of material adhering to walls and certain roots of fibrous nature.
• Chain Knocker - For use when vigorous action is required for cleaning of scale in pipes and boiler tubes.
• Flue Brush - For use for finish cleaning required of boiler tubes and heat exchangers.

3" to 10" (75-250 mm) Lines

• Recommend 5⁄8" (16 mm) cable for 3" (75 mm) to 6" (150 mm) drain lines up to 250' (76 m).
• Recommend 3⁄4" (20 mm) cable for 4" (110 mm) to 10" (250 mm) drain lines up to 250' (76 m).

• Features performance, cable control, durability and maneuverability demanded by professional users. Ideal for tough jobs, such as roots.
• Cable spins at 200 RPM.
• Powerful, yet quiet, 600-watt universal motor and gearbox bear down as cutter engages tough obstructions.
• Audible and visual signals for the operator.
• Inner-drum and ball bearing distributor arm work with motor and gearbox system to reduce chance of cable flip-over inside the drum.
• Main and inner drums won’t rust, split or dent – ever. Cleans easily for professional appearance. Main drum holds up to 100' (30.5 m) of 3⁄4" (20 mm) cable, or 125' (38 m) of 5⁄8" (16 mm) cable.
• Powerful AUTOFEED® mechanism has grease fittings and an open design for easy maintenance. It advances and retrieves cable up to 22' (6.7 m) per minute.
• Two position stair climber eases transport and loading – to eliminate extra cost for loading wheels.
• Narrow profile lets the machine to fit through bathroom doors.
• Handles adjust to desired height to ensure balanced transport.
• Includes RIDGID® PVC drain cleaning gloves and operator’s manual.
• Approved by CSA to CSA and UL Standards (115 V only).

Additional Information:

• Item Code: K- 500

Versatile AUTOFEED® adjusts for either 5/8” or ¾” cable with a twist of a screwdriver.

• Recommend 5/8” (16 mm) cable for 3” to 6” (75 to 150 mm) drain lines up to 150’ (48 m).
• Recommend ¾” (20 mm) cable for 4” to 8” (100 to 200 mm) drain lines up to 200’ (62 m).

• Powerful, self-contained machine ideal for lateral lines. Easy to transport, minimal set-up – attach a tool and go.
• AUTOFEED control advances and retrieves cable with a push of a lever, up to 20' (6 m) per minute.
• Versatile AUTOFEED control adjusts for either 5⁄8" (16 mm) or 3⁄4" (20 mm) cable with a twist of a screwdriver.
• Cable spins at 200 RPM.
• Tough, corrosion-resistant cable drum withstands harsh treatment and abuse. It will not dent or corrode and cleans easily.
• Drum holds 100' (30.5 m) of 3⁄4" (20 mm) or 125' (35 m) of 5⁄8" (16 mm) cable and is designed for quick, easy removal.
• Balanced design gives the machine a lightweight “feel.” Transport wheels ease loading into service truck/van.
• Equipped with 550-watt induction motor.
• Approved by CSA to CSA and UL Standards (115V only)
• Includes RIDGID® PVC drain cleaning gloves and operators manual

Standard 3/4" (20 mm) Tool Set Includes

• T-406 Spade Cutter
• T-407 Retrieving Auger
• T-411 2" (50 mm) Cutter
• T-413 3" (75 mm) Cutter
• T-414 4" (110 mm) Cutter

Standard 5/8" (16 mm)Tool Set Includes

• T-403 3" (75 mm) P-Trap Cutter
• T-407 Retrieving Auger
• T-406 Spade Cutter
• T-411 2" (50 mm) Cutter
• T-413 3" (75 mm) Cutter

Additional Information:

• Item Code: K 750

The Model K-400 offers several unique, user-friendly features to make the toughest drain cleaning jobs easier and hassle-free. Designed with a sleek profile, the Model K-400 is a great fit for drain cleaners, service plumbers, facility and institutional maintenance departments and property management companies.

• 3/8" (10 mm) cable best for 1 1/2" to 3" (40 mm to 75 mm) lines.
• 1/2" (12 mm) cable best for 3" to 4" (50 mm to 110 mm) lines.
• Integrated Transport Cart - easy movement to and from the job site. Heavy-duty, large wheels easily navigate over bumps and up stairs.
• Retractable Handle - high-handle height during transport.
• Cable Control System - causes the drum to stop spinning when the blade becomes lodged in a blockage, limits potential for cable to flip-over in the drum and helps to indicate to operator when blockages are encountered.
• "Solid Core” Cable - uses tough 3⁄8" (10 mm) or 1⁄2" (12 mm) Integral Wound (IW) solid core cable that is rugged and kink resistant.
• AUTOFEED® Control - offered as an accessory, this patented, automatic cable feed powers cable in and out of the drain. Reverse the direction of the AUTOFEED and the cable feeds back into the drum.

Additional Information:

• Item Code: K-400

1/2" to 1 1/2" (12.6 to 40 mm) Drain Lines

• For light-duty cleaning.
• Comfortable hand grip eases effort.
• Equipped with 1⁄4" x 25' (6.3 mm x 7.6 m) MAXCORE® cable with bulb auger.
• Two-way AUTOFEED control keeps hands and work area clean.

• Cleaning Brushes: 13 Internal, Standard-duty wire for 1/2" - 4" fittings
• External Cleaning Brush and Deburring Cutter: For 1/2" - 2" fittings and 1/2" - 4" tube
• Reamer: Replaceable blade for 1/2" - 2" tube
• Accessories: No. 126 Facing Cutter - Replaceable hardened steel insert
• Fitting Brushes: Small internal brushes for refrigeration and air conditioning

Additional Information:

• Item Code: 124

High quality tools in 3' (1 m) and 6' (2 m) lengths provide fast and safe clearing of toilet obstructions.

• Vinyl guard protects porcelain.
• New durable, kink-resistant, 1⁄2" (12.7 mm) compression-wrapped Inner Core Cable.
• Large, ergonomically designed handles.
• Negotiate water-conserving toilets.

Additional Information:

• Item Code: K3-K6

The professional’s choice for many years, the Model K-25 Hand Spinner offers premium quality. It’s the ideal tool for the user who demands the best.

• Premium-quality, precision machined, 3-jaw chuck firmly secures cable. Releases cable with the flick-of-the-wrist.
• Cast aluminum ribbed hand grip won’t slip in your hand.
• Rotary molded plastic drum won’t dent or rust – cleans easily.
• Available in bulb head and drop head models. 5⁄16" (8 mm) x 25' (7,6 m) vinyl-wrapped inner core, kink-resistant cables.
• 5⁄16" x 25' (8 mm x 7.6 m) vinyl-wrapped inner core, kink-resistant cables.
• Balanced for comfortable operation.
• Drum Capacity: 5⁄16" x 25' (8 mm x 7.6 m).
• Works through traps and bends in sinks, tubs, drinking fountains, lavatories, urinals or vent pipes.

Additional Information:

• Item Code: K-25

Ideal for users seeking excellent performance and value.

• Slip-resistant collet chuck that grips cable with the flick-of-the-wrist.
• 5/16" x 25' (8 mm x 7.6 m) hollow core cable with bulb head auger.
• Rotary molded plastic drum that won’t rust or dent – cleans easily.
• Open drum design that permits access to cable and allows application of RIDGID® Cable Rust Inhibitor.

Additional Information:

• Item Code: K-26

The K-1 Combination Auger provides an all-in-one solution for removing blockages from urinals and shower drains.

• Dual Power Operation - provides additional power necessary for removing tough obstructions.
• Telescoping Design - additional cable length to remove obstructions further down the line.
• “C” Cutter Head - break up hard blockages.
• Left Hand Wound Cable - strengthens cable and prevents kinking.

Additional Information:

• Item Code: K-1

• A rugged, compact machine suited for straight main line work in municipalities, universities, institutions and industry. Drives sectional sewer rods through long, straight runs of larger diameter pipe – up to 500 feet (150 m).
• Equipped with a 6 HP gasoline engine and forward/reverse transmission. Rod rotates at 133 RPM in forward and reverse at full throttle.
• Spring-loaded throttle control is hand operated. Varies rod speed within range. Returns engine speed to idle and disengages clutch when operator releases throttle.
• Adjustable torque limiter minimizes kinking of rods and excessive torque through transmission system.
• Large 10" (250 mm) wheels on frame for optimal transport.
• Includes A-1 RIDGID® drain cleaning mitt and operator's manual

Additional Information:

• Item Code: K-1000